This is a guide on how to install the VIOFO A119 V3 dash cam. The article will introduce how to install the dash cam mount, how to connect to the car charger, and how to adjust the dash cam viewing angle. By following the steps in this article, you will be able to easily install and use the VIOFO A119 V3 dash cam.
Install the Mount
1. Slide the mount into the slot on the back of the camera.
2. Peel the glue protector off the sticker.
3. Choose a suitable location to install / mount the camera; ensuring that it provides the best possible view.
Connect to Car Charger
Plug the USB charging adapter into your vehicle’s 12V/24V female power socket. Insert the Mini USB cable’s male port into the camera’s female Mini USB port.
Note:
- For GPS version mount, use the female Mini USB port on the mount or on the camera’s side.
- For non-GPS version mounts, use the female Mini USB port on the camera’s side.
Adjust the View Angle
Adjust the angle by moving the lens up / down.
Tips:
- Do not turn on ‘Motion Detection’ unless your vehicle is parked. If ‘Motion Detection’ is enabled while driving, the camera may not record continuously.
- It is recommended to keep the G-sensor set to ‘Low’ (default setting).
- Do not install / mount the camera in a location that interferes with the driver’s visibility and safety.
- Install / mount the camera close to the rearview mirror so that both sides of the scene being recorded are equally covered by the camera’s FOV (field of view).
- To ensure a clear view on rainy days the lens should be positioned within the windshield wiper’s sweeping range.
- Do not install / mount the camera on or near airbag panels.
- Installation / mounting location should not be affected by sun control film (window tint). There should not be any other electronic equipment close to the camera for optimal performance.
Note: Do not install / mount the camera on or near an airbag panel or within the airbag’s working range. The manufacturer is not liable for any injury or death caused by the deployment of the airbag.
Inserting / Removing the memory card
Inserting the memory card
Push the memory card into the card slot until you hear a click, with the card label facing the forward (away from the screen).
Removing the memory card
Ensure that the camera is turned off/ not recording, and then push the edge of the memory card with your fingernail.
The card will spring out far enough to be removed.
Note: The Micro SD card is sold separately. The microSD card must have a Class-10 or UHS-I rating and the capacity up to 256GB. 64GB,128GB and 256GB micro SD cards must be formatted with the FAT32 le system, either on a computer or in the camera.
We recommend you buy the VIOFO brand memory card which are manufactured with top-tier MLC NAND ash, making them durable and reliable.
Formatting the card
Format the card (‘Format’ option in Dash Camera ‘System settings’) to prepare for first use in the dash camera.
Formatting will permanently erase any data on the micro SD card. For best performance, format periodically (after backing up any important files).
